Mpio DMG Manuel de service télécharger pdf (Page 44)

2. Create another zone that contains:

• The second host adapter port WWPN

• An EVA port WWPN from the second controller

3. Add the zones to the switch configuration.

4. Enable or re-enable the configuration to add the zones to the fabric’s current configuration.

Table 9 provides sample values for a single host zone.

Table 9 Single host zone example

EVA port WWPNHost adapter port WWPNZone

50:00....20:7d

21:00...a2:cb

EVA_Port_1_Zone

50:00....20:78

21:00...2a:ca

EVA_Port_2_Zone

NOTE:

Additional hosts can be added to each zone.

Table 10 provides sample values for a dual host zone.

Table 10 Dual host zone example

EVA port WWPNHost adapter port WWPNZone

50:00....20:7d

21:00...a2:cb (Host 1)

21:00...54:20 (Host 2)

EVA_Port_1_Zone

50:00....20:78

21:00...a2:ca (Host 1)

21:00...54:21(Host 2)

EVA_Port_2_Zone

Using HP Command View EVA for multipath configuration

This section describes using the HP Command View EVA management tool to configure a multipath

environment.

Creating a host entry for a multipath Mac OS X host

To create an HP Command View EVA host entry for a multipath Mac OS X host:

1. Log on to HP Command View EVA.

2. In the Hosts folder on the Storage System pane, click Add host.

By default, the host type is Fibre Channel.

3. Enter the name of the host in the Name box.

HP Command View EVA displays this name in the Hosts folder.

4. Select the host adapter port WWPN from the Port World Wide Name list.

Multipath configuration44

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Pas de commentaire

Mpio DMG Manuel de service Page 44