Mpio DMG Manuel de service télécharger pdf (Page 23)

Channel device

Select a channel (adapter port) from the Device Listing to view information about the ATTO Fibre

Channel card (PCI Info tab) or to configure the NVRAM. Figure 5 shows an example of a channel

NVRAM display.

Figure 5 Channel—NVRAM tab

Configuring the NVRAM

This section provides guidelines for configuring the NVRAM. After you have NVRAM settings, click

Commit to save the changes. You must reboot the system for the changes to take effect.

Use care when changing the NVRAM settings. Make changes only if you are sure of the results.

CAUTION:

ATTO host adapters are factory set for proper operation. Entering invalid or incorrect settings with

the ATTO Configuration Tool can result in unexpected behavior, such as hardware failure.

Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system

configuration guide 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 63 64

Pas de commentaire

Mpio DMG Manuel de service Page 23