Mpio DMG Manuel de service télécharger pdf (Page 45)

5. For a Mac OS X host, select the operating system type.

• For XCS 6.100 or later, select Custom from the Operating System Type list, and then enter

00000002024000A8 as the Custom type.

• For XCS 09003000 or later, select Apple Mac OS X from the Operating System Type list.

6. Click Add host.

7. In the Hosts folder, select the host you created in Step 3.

8. Click the Ports tab (Figure 21).

9. Click Add port.

10. Select the second host adapter port WWPN from the Port World Wide Name list.

11. Click Add port.

12. Click OK.

13. To add another port, repeat Step 9 through Step 12.

14. Verify that the HP Command View EVA OS X host entry contains the WWPN from each ATTO

host adapter port on the system.

Figure 21 Host Properties—Ports tab

Creating and presenting a LUN to a Mac OS X host

To create and present a LUN to a Mac OS X host:

1. Log on to HP Command View EVA.

2. In the Virtual Disks folder on the Storage System pane, click Create Vdisk.

3. Enter a name for the vdisk in the Name box.

4. Enter the size of the vdisk in the Size box.

5. Select a group from the Disk group list.

6. Select a redundancy (RAID) level.

7. Select the Mac OS X host entry name from the Present to host list.

8. Click Create Vdisk.

9. Verify vdisk presentation to the Mac OS X system:

1. Select the Mac OS X host entry.

2. Under Host Properties, click the Presentation tab.

3. Verify that the vdisk appears (Figure 22).

Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system

configuration guide 45

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 63 64

Pas de commentaire

Mpio DMG Manuel de service Page 45