Mpio DMG Manuel de service télécharger pdf (Page 13)

2 Installing the Celerity FC host adapter

This chapter describes installation of the Celerity FC host adapter and host system setup and

configuration.

Setting up the host system

To set up the host system:

1. Install the Celerity FC host adapter using the procedure provided by ATTO Technology. For more

information or to download the ATTO Celerity Fibre Channel Host Adapters Installation and

Operation Manual, see the ATTO Technology website:

http://www.attotech.com/software/manuals.html

Under Celerity Fibre Channel Host Adapters, click Celerity 4-Gb and 8-Gb Host Adapter Installation

& Operation Manual.

2. Install the Celerity FC host adapter driver osx_drv_celerity_xxxMP.dmg (where xxx is the

latest available version), available on the ATTO Solutions for HP Customers website:

http://www.attotech.com/solutions/hp

Under Fibre Channel, select Solution Details, and then click Obtain Drivers.

3. Reboot the host.

4. Install the ATTO Configuration Tool driver osx_app_configtool_xxx.dmg (where xxx is

the latest available version), available on the ATTO Solutions for HP Customers website:

http://www.attotech.com/solutions/hp

Under Fibre Channel, select Solution Details, and then click Obtain Drivers.

NOTE:

During ATTO Configuration Tool installation, select Full Installation when prompted.

5. Start the ATTO Configuration Tool from the Applications folder.

6. Connect the Fibre Channel cables from the host adapter ports to the Fibre Channel switch.

7. Reboot the host.

Mac OS X Fibre Channel connectivity to the HP StorageWorks Enterprise Virtual Array storage system

configuration guide 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Pas de commentaire

Mpio DMG Manuel de service Page 13